KM.2 – Horizontal angular torsion series up to 10000 Nm
Electromechanical horizontal torsion testing machines of the KM.2 series in a stand design up to 10000 Nm, which are primarily intended for measuring torque and friction torque, including the angle of rotation of both parts and entire products with the possibility of performing these tests over “0” These machines are suitable for both research and development, routine quality control in laboratories and operations, but also for assembly and testing semi-automatic lines. LABORTECH machines are characterized by very high rigidity of the test frame, speed and accuracy of measurement in semi-automatic mode.
Download:
MEZERA
General key features of the KM.2 series
- Robust horizontal stand modular design with mechanical resistance and durability.
- Abnormally high rigidity and mechanical resistance of the machine combined with ergonomics at a high level.
- Integrated torsion mechanism on the left side of the machine.
- Dynamic AC servo drive with continuous speed control via converter or servo converter.
- The KM series machine comply with all the above-mentioned EC directives on machinery and equipment and work in accordance with the new safety functions according to EN ISO 13850-SIL 1/PL.
- Torque sensors working in accuracy class according to EN ISO 7500-1, ASTM E4 incl. linearization.
- The basic control of the machine is performed by SIEMENS PLC with integrated touch LCD display with FAROTest software in the base of the machine or higher FULL version with measuring and control electronics of the EDCi series with a sampling frequency of 2.5 or 10 kHz. Analog signal resolution level ± 250,000 divisions (20 ms).
- Complete evaluation and test control software for testing materials in torsion – KMTest – BASIC software.
- Protective safety covers made of ITEM profiles and polycarbonate with high safety EN ISO 13849-1 /2 or safety barrier.
- Possibility to control and set up the machine using a touch LCD monitor.
- Wide range of accessories – test mandrels, fixtures, chucks, etc.
MEZERA
VIDEOS on KMTest testing machines of the KM.2 series
Torsion testing of high-strength wires
Test of formability of high-strength steel wires in conditions of simple torsion according to ISO 7800, DIN 6499 and GOST 1545-80.
KMTest software operation – practical test
Practical operation of the KMTest software – definition for the formability test of high-strength steel wires according to the GOST 1545-80 standard.
MEZERA
Do you have questions about our products?
Do not hesitate to contact our product experts.
We look forward to your interest.
–
MEZERA
WE OFFER TECHNICAL SOLUTIONS – WE ARE PROFESSIONALS
Individual approach to the design of fixtures and the machine itself …
MEZERA
Machine application
It depends on where the machine will be deployed – testing room, research facility or operation. Accordingly, the machine can be supplemented or prepared for:
- Manual operation – manual loading and unloading
- Semi-automatic operation – the operator establishes, after evaluation the part is removed by a robot, manipulator, etc.
- Automatic operation – the part is loaded and unloaded by a manipulator, robot, etc.
Add inputs and let us work. We will fulfill your ideas.
Tested parts
The horizontal rotary torsion series KM.4 is ideal for static tests of the following parts:
- Plastics
- Test of steel wires in conditions of simple torsion according to ISO 7800, DIN 6499 and GOST 1545-80.
- Metallic materials, e.g. torsion back test on wires, EN 2002-13
- Medical Technology Products
- Fasteners and connectors
- Engine drive shafts
- Motor bearings, etc.
Give us a drawing of the tested part and we will design everything for you.
Fixtures design
Each part tested on horizontal torsion machines must have 100 % test fixtures that have:
- High accuracy
- Concentricity
- Hardness
- Toughness
- Mechanical resistance
All fixtures are constructed in a 3D CAD INVERTOR with detailed diagnostics using the FEM method, manufactured and subsequently subjected to demanding testing in our testing laboratory.
We guarantee the result, we are professionals.
Test evaluation
KMTest software – BASIC – intelligent, intuitive and powerful software is used for manual, semi-automatic or automatic operation with modules:
- Module KMTest – A designed for measuring torque and friction torque, including the angle of rotation.
- Module KMTest – R designed for measuring torque at different or constant speeds
- We will help you increase the productivity and quality of testing in your testing rooms and testing laboratories.
- You can streamline, refine, and speed up the performance of your tests and adapt your testing environment to make it easy for operators to measure torque and angle or perform torsional fatigue tests depending on the number of revolutions of samples and entire products.
Say what you want and what you expect from the software and we will do it for you.
Our specialists are able to custom design and manufacture a machine or automated system with a high degree of quality and uniqueness. When designing fixtures, optimization often begins with details and in 3D STEP formats or DWF viewers. When developing LABORTECH products, we place great emphasis on the quality, design and affordability of our products. In the design of machines and systems, we pay attention to the minimum environmental impact and ECODESIGN in accordance with the standard ČSN EN ISO 14001: 2016. We verify the accuracy, reliability, durability and mechanical resistance of our machines in a test and calibration center.
MEZERA
TABLE OF TECHNICAL PARAMETERS series KM.2 up to 500Nm
- Technical data
- product code
- Max. torque
- Testing torque
- Resolution
- Height side – A
- Height side – A´
- Width side. – B
- Depth side. – C
- Working axis – D
- Height of axis – E
- Weight
- Machine power consumption
- Measuring range
- Units
- –
- Nm
- ot/min
- °/ot
- mm
- mm
- mm
- mm
- mm
- mm
- kg
- kVA
- Nm
- KMTest 6.20
- 1.13020119
- 20
- 0,0003 do 180
- 0,000136
- 1160
- 1539
- 1096
- 396
- 0 až 600
- 72
- 174
- 0,55
- 0,06 až 20
- KMTest 6.50
- 1.13020219
- 50
- 0,0003 do 180
- 0,000136
- 1160
- 1539
- 1096
- 396
- 0 až 600
- 72
- 174
- 1,2
- 0,15 až 50
- KMTest 6.100
- 1.13020319
- 100
- 0,0003 do 100
- 0,000062
- 1230
- 1620
- 1230
- 496
- 0 až 780
- 98
- 182
- 3,2
- 0,3 až 100
- KMTest 6.200
- 1.13020419
- 200
- 0,0003 do 100
- 0,000062
- 1230
- 1620
- 1230
- 496
- 0 až 780
- 98
- 182
- 3,2
- 00,6 až 200
- KMTest 6.500
- 1.13020519
- 500
- 0,0003 do 50
- 0,000032
- 1320
- 1903
- 1577
- 596
- 0 až 890
- 160
- 230
- 6,5
- 1,5 až 500
KMTest – BASIC Software
Intuitive software for measuring torque, angle and torsional fatigue tests
KMTest – BASIC – intelligent, intuitive and powerful software that helps you increase the productivity and quality of testing in your test rooms and test laboratories. You can streamline, refine and speed up the execution of your tests and customize your testing environment to make it easy for operators to measure torque and angle in the I and II quadrant or perform fatigue tests in torsion depending on the number of revolutions under the stress of samples and entire products with support for EN, ISO, DIN, ASTM and GOST standards.
