Contact
TESTING OF COMPOSITE AND CERAMIC INSULATORS IN TENSILE – LABTEST 6.1500H.7 – STATIC MODE
Basic description:
LabTest 6.1500H.7 – this machine is designed for mechanical testing of electrical ceramic and composite insulators and is capable of performing static tensile tests as well as long-term controlled loading tests. One of the main advantages of this machine is its working clamping length, which reaches up to 7 meters, allowing testing of very long insulators and assemblies, such as those often used in the power industry. LabTest 6.1500H.7 has been designed to meet the requirements of strict international standards, which ensures its wide applicability and reliability.
Basic parameters:
Max. tensile test force – 1500kN, cylinder stroke 620 mm, working length for clamping the insulator – 7150 mm, total machine length 11 m, hydraulic unit with flow rate Q=8l/min, calibration in accordance with ČSN EN ISO 7500-1 and ČSN EN ISO 9513, protective safety cover with electronic door opening monitoring and high safety according to ČSN EN ISO 13849-1, ČSN EN ISO 12100 and ČSN EN ISO 14120 …
Application – Standards:
Insulators for overhead lines – ČSN IEC 383-1, ČSN IEC 1109, ČSN EN 60305, ČSN EN 61109
Tested materials:
tests of plate insulators, rod insulators, type, sample and piece tests of insulators
Contact us:
TESTING OF COMPOSITE AND CERAMIC INSULATORS IN TENSILE – LABTEST 6.1500H.7 – STATIC MODE
Basic description:
LabTest 6.600H.7 – this machine is designed for mechanical testing of electrical ceramic and composite insulators and is capable of performing static tensile tests as well as long-term controlled loading tests. One of the main advantages of this machine is its working clamping length, which reaches more than 7 meters, allowing testing of very long insulators and assemblies, such as those often used in the power industry. LabTest 6.600H.7 was designed to meet the requirements of strict international standards, which ensures its wide applicability and reliability.
Basic parameters:
Max. tensile test force – 600kN, cylinder stroke 50 mm, working length for clamping the insulator – 7250 mm, total machine length 10 m, hydraulic unit with flow rate Q=4l/min, calibration in accordance with ČSN EN ISO 7500-1 and ČSN EN ISO 9513, protective safety cover with electronic door opening monitoring and high safety according to ČSN EN ISO 13849-1, ČSN EN ISO 12100 and ČSN EN ISO 14120 …
Application – Standards:
Insulators for overhead lines – ČSN IEC 383-1, ČSN IEC 1109, ČSN EN 60305, ČSN EN 61109
Testované materiály:
zkoušky talířových izolátorů, tyčových izolátorů, typové, výběrové a kusové zkoušky izolátorů
Contact us:
MEZERA
TESTING OF STEEL ROPE IN TENSION FOR ELECTRICITY DISTRIBUTION – LABTEST 6.2000H.7 – STATIC MODE
Basic description:
LabTest 6.2000H.7 – this machine is designed for testing steel ropes for power lines and is capable of performing static tensile tests until the sample breaks. One of the main advantages of this machine is its hydraulic clamping jaws, which clamp any type of rope surface, and its electrically adjustable working clamping length, which allows testing very long steel ropes, such as those often used in the energy industry. LabTest 6.2000H.7 has been designed to meet the requirements of strict international standards, which ensures its wide applicability and reliability.ch ensures its wide applicability and reliabilityhich ensures its wide applicability and reliability.
Basic parameters:
Max. tensile test force – 2000kN, cylinder stroke 1000 mm, working length for clamping the insulator – 6500 mm, total machine length 12.4 m, hydraulic unit with flow rate Q=40l/min, calibration in accordance with ČSN EN ISO 7500-1 and ČSN EN ISO 9513, protective safety cover with electronic door opening monitoring and high safety according to ČSN EN ISO 13849-1, ČSN EN ISO 12100 and ČSN EN ISO 14120 … door opening and high safety according to ČSN EN ISO 13849-1, ČSN EN ISO 12100 and ČSN EN ISO 14120 …ch ensures its wid
Application – Standards:
Steel ropes for power lines – ČSN EN 12385-1+A1, ČSN EN 12385-8, ASTM A1061, rope standards according to ISO/TC 105, ČSN EN 13411-2, ČSN EN 13411-3, ČSN EN 13411-4, ČSN EN 13411-5, ČSN EN 12385-1 + A1, ČSN EN 1492-2 etc.
Tested materials:
testing of steel wire ropes for power lines zkouškyocelovýchlanproelektrick
Contact us:
TESTING OF COMPOSITE AND CERAMIC INSULATORS IN BENDING – LABTEST 6.100.1 xx – STATIC MODE
Basic description:
The LabTest 6.100.1.30 x electromechanical testing machine is designed for mechanical testing of electrical ceramic and composite insulators in bending. One of the main advantages of this machine is its working clamping length and bending height, which allows testing of very long insulators and assemblies, such as those often used in the power industry. The machine is equipped with a swing mechanism that freely copies the bend of the insulator and does not introduce errors into the measurement. LabTest 6.100.1.30 x was designed to meet the requirements of strict international standards, which ensures its wide applicability and reliability.
Basic parameters:
Max. bending test force – 100kN, maximum test speed 1000 mm/min – 50kN, working length/height for clamping the insulator – 5500/2000 mm, total machine length 7600 mm, max. machine height 6750 mm, electromechanical drive, upper crossbar movement – mechanical, calibration in accordance with ČSN EN ISO 7500-1 and ČSN EN ISO 9513, protective safety cover with electronic door opening monitoring and high safety according to ČSN EN ISO 13849-1, ČSN EN ISO 12100 and ČSN EN ISO 14120 …
Application – Standards:
Insulators for overhead lines – IEC 61952, ČSN IEC 383-1, ČSN IEC 1109, ČSN EN 60305, ČSN EN 61109 IE EN60305ČSN EN 61109 EC 61C 61952ČSNIEC383-1ČSNIEC1109ČSNEN60305ČSN EN 61109 EC 61EN60305ČSN EN 61109 EC 61
Tested materials:
tests of plate insulators, rod insulators, type, sample and piece tests of insulators
Contact us:
MEZERA
Contact
LABORTECH s.r.o. , Rolnická 1534/130a, 747 05 Opava, Czech Republic
Research & Development
Reducing energy intensity We increase your productivity Development and implementation
News & Events
ISO certification National registration
