Contact

Specific testing machines

The development department of LABORTECH is an expert in the analysis of technical requirements for the production of individual specific testing machines and systems. Using many years of company know-how, our specialists are able to penetrate into the issues of a particular customer and individually design and manufacture a machine with a high degree of quality and uniqueness using 3D models, electrical projects and customer software. The more unusual the application, the more it inspires us to find a new solution.

We have our development teams…

Customer solutions – uniqueness down to the last detail…

LABTEST SST 6.10-5.1 TESTING MACHINE FOR LOAD-BEARING TESTING OF SHELVES

LabTest-SST-6.10-5.1-Norma-Standard-EN-16122-1499x630

DATA SHEET

Basic description:

The LabTest SST 6.10-5.1 shelf load capacity testing machine is a key device to ensure storage safety and reliability. This machine makes it possible to accurately determine the maximum weight and load that a given rack or total racking system can support, thereby preventing accidents and damage to stock. The LabTest SST testing machine is equipped with a system for monitoring and recording data on the performed tests. This enables the documentation of results and the monitoring of changes in the load capacity of the racks over time. The setting of these parameters via a PC and touch-sensitive TOUCH monitor allows a quick response to potential problems during the setting and improves the overall safety and performance of the racking systems.

Basic parameters:

Max. test compressive force – 50kN (5 x 10kN)

Max. shelf length / width – 2400 x 700 mm

Use:

Consumer Industry – Shelving and shelving are widely used in a variety of industries and environments. Their uses include the organization and storage of various materials and goods, ranging from industrial compositions to retail spaces.

Materials tested:

Racks and rack shelves, load capacity, deflection, mechanical resistance, max. load capacity of a rack or shelf to deformation

VIDEO

MOMENT ASSEMBLY AND TIGHTENING CHAIR FOR TRAM BICYCLES LABTEST TWS 300-12

DATA SHEET

Basic description:

LabTest TWS 300-12 – torque mounting and tightening bench for pressing and dismounting wheelsets for trams from LABORTECH is a special device that allows safely, efficiently, precisely and controlled dismantling and mounting of wheelsets so that the necessary maintenance work can be carried out. All accurate measurements on the tram wheel using the TWS 300-12 machine are crucial to ensure the safe, efficient and reliable operation of trams and rolling stock. Monitoring and setting of these parameters via PC and touch screen TOUCH allows quick response to potential problems during setting and improves the overall safety and performance of the tram system. the overall safety and performance of the tram system.the overall safety and performance of the tram system.

Basic parameters:

Max. test compressive force – 300 kN,

Max. tightening/tightening torque – 12,000Nm

Use:

Railway industry – manufacturing of rolling stock and trams, rolling stock repair shops, transport companies, ŽOS, etc. This machine is a key tool for tram transport operators and tram maintenance and repair shops. maintenance and repair shops.

Materials tested:

Measurement and control of pressing/tightening force and tightening torque, including measurement of wheel runout and splits…

VIDEO

SEMI-AUTOMATIC WORKPLACE FOR MPT 1500-PA TRACTION DEVICE ASSEMBLY AND TESTING

DATA SHEET

Basic description:

The semi-automatic carousel workplace for assembly and testing of the LabTest MPT 1500 – PA traction device consists of four workplaces (positions). Each of these stations has a clearly defined function, namely: assembly station 1, assembly and adjustment station 2, test station and unloading station. The drawbar can be completely assembled and measured on the machine using the touch LCD monitor in conjunction with the MSVTest v. 1 test software. Part of the semi-automatic workplace is a manipulator (balancer), which ensures handling of drawbars and loads. The manual handling system can be replaced by a robotic system.

Basic parameters:

Max. test compressive force – 300kN

Max. test force- 1500 kN

Use:

Railway industry – manufacturing of rolling stock and trams, rolling stock repair shops, transport companies, ŽOS, etc. This machine is crucial for operators, manufacturers, maintenance and railway repair shops and engineering shops of railway wagons and locomotives.

Materials tested:

Measurement and control of traction devices including buffers for the railway industry

VIDEO

TEST SET FOR TESTING THE MECHANICAL PROPERTIES OF COPPER AND COPPER ALLOYS – LABTEST MCS 20

DATA SHEET

Basic description:

The special LabTest MCS test assembly is intended for testing the mechanical properties of copper and copper alloys according to GOST 28515-97 and BS EN 12893:2000. The machine enables not only the testing of copper samples on 3 separate test areas, but also the preparation of test samples on a winding device working quickly and efficiently. The desired course of testing is set by the SIMATIC PLC control system. All evaluation and control of the test is carried out via the operating LCD display. All evaluation and control of the test is carried out via the operating LCD display. All evaluation and control of the test is carried out via the operating LCD display.

Basic parameters:

3 test workspaces, length of vertical axis – 1300 mm

Testing speed – 20 mm/s, spiral winding speed – 50 mm/min

Use:

EN 12893 – mechanical testing of copper samples and copper alloys, GOST 28515-97 – copper. Test method of spiral elongation of the specimen. EN 12893 – mechanical testing of copper samples and copper alloys, GOST 28515-97 – copper.

Materials tested:

Copper and copper alloys – Determination of helix elongation number Determination of helix elongation number

VIDEO

MEZERA

TEST SET FOR SHEET AND STRIP TESTS BY ALTERNATE BENDING – LABTEST SMB 200

DATA SHEET

Basic description:

The special testing machine SMB 200 is intended for determining the ability of sheets and strips made of metal materials to be plastically deformed by alternating bending. Thanks to the electrically continuously adjustable arbitrary test angle, variable setting of the switching force in the range of 20 to 100 N, this test system can be configured with the help of definitions for a wide range of different types of samples. All evaluation and control of the test is carried out via the operating LCD display. Range of 20 to 100 N, this test system can be configured with the help of definitions for a wide range of different types of samples. D display.

Basic parameters:

Preload force: 20 – 100 N,

Nominal diameter or thickness of wire: 0.15 – 10 mm

Adjustable distance of rotation axis and driver (h): 5 – 100 mm

Angle of deviation of the lever from the starting position: 90°±3°

Use:

ISO 7799 – thickness test of sheets and strips by alternating bending. GOST 13813-68 – bending test for sheets and strips < 4 mm thick

Materials tested:

Steel sheets and their alloys

VIDEO

TESTING MACHINE FOR DETERMINING HARDENABILITY ACCORDING TO JOMINY – AQUATest 642

DATA SHEET

Basic description:

The LabTest – AQUATest 642 testing device is intended for testing the hardenability of test specimens in accordance with EN ISO 642. The AQUATest 642 test device consists of 3 test positions that allow the impact of a stream of water on the hardened front surface of the test specimens. The test machine consists of stainless steel tubs, where the water column is continuously regulated, a quick-closing tap and feedback regulation of the water. This entire system is controlled from a superior PLC with a touch LCD panel in IP 64 protection, which monitors individual flow sensors, water temperatures, level gauges and, last but not least, the heating of the medium.

Basic parameters:

3 test workspaces

Nominal diameter or thickness of wire: 0.15 – 10 mm

Adjustable distance of rotation axis and driver (h): 5 – 100 mm

Angle of deviation of the lever from the starting position: 90°±3°

Use:

Hardenability testing of test specimens in accordance with the EN ISO 642 standard

Materials tested:

Steel materials. Test specimens diameter 25 mm and length 100 mm.

VIDEO

www.labortech.eu

Contact

LABORTECH s.r.o. , Rolnická 1534/130a, 747 05 Opava, Czech Republic

Company

About us Dealership Career Company philosophy Certification

Research & Development

Reducing energy intensity We increase your productivity Development and implementation

News & Events

News Projects Attractions Seminars