Kontakt

SPEZIFISCHE PRÜFMASCHINEN UND -ANLAGEN

Die Entwicklungsabteilung von LABORTECH ist Experte für die Analyse technischer Anforderungen zur Herstellung individueller spezifischer Prüfmaschinen und -anlagen. Mit unserem langjährigen FirmenKnow-how sind unsere Spezialisten in der Lage, sich in die Probleme eines konkreten Kunden einzudenken. Anhand von 3D-Modellen von Maschinen, Entwicklung von Elektroprojekten und der kundenspezifischer Programmierung von Prüfsoftware können sie eine Maschine mit einem hohen Maß an Qualität und Einzigartigkeit konzipieren und herstellen. Je ungewöhnlicher die Anwendung, desto mehr inspiriert sie uns zu einer neuen Lösung.

Wir haben unsere Entwicklungsteams…

Kundenlösungen – Einzigartigkeit bis ins Detail

LABTEST SST 6.10-5.1 PRÜFMASCHINE ZUR BELASTUNGSPRÜFUNG VON REGALEN

LabTest-SST-6.10-5.1-Norma-Standard-EN-16122-1499x630

DATA SHEET

Basic description:

The LabTest SST 6.10-5.1 shelf load capacity testing machine is a key device to ensure storage safety and reliability. This machine makes it possible to accurately determine the maximum weight and load that a given rack or total racking system can support, thereby preventing accidents and damage to stock. The LabTest SST testing machine is equipped with a system for monitoring and recording data on the performed tests. This enables the documentation of results and the monitoring of changes in the load capacity of the racks over time. The setting of these parameters via a PC and touch-sensitive TOUCH monitor allows a quick response to potential problems during the setting and improves the overall safety and performance of the racking systems.

Basic parameters:

Max. test compressive force – 50kN (5 x 10kN)

Max. shelf length / width – 2400 x 700 mm

Use:

Consumer Industry – Shelving and shelving are widely used in a variety of industries and environments. Their uses include the organization and storage of various materials and goods, ranging from industrial compositions to retail spaces.

Materials tested:

Racks and rack shelves, load capacity, deflection, mechanical resistance, max. load capacity of a rack or shelf to deformation

VIDEO

MOMENT MONTAGE- UND SPANNSTUHL FÜR STRASSENBAHNFAHRRÄDER LABTEST TWS 300-12

DATA SHEET

Basic description:

LabTest TWS 300-12 – torque mounting and tightening bench for pressing and dismounting wheelsets for trams from LABORTECH is a special device that allows safely, efficiently, precisely and controlled dismantling and mounting of wheelsets so that the necessary maintenance work can be carried out. All accurate measurements on the tram wheel using the TWS 300-12 machine are crucial to ensure the safe, efficient and reliable operation of trams and rolling stock. Monitoring and setting of these parameters via PC and touch screen TOUCH allows quick response to potential problems during setting and improves the overall safety and performance of the tram system. the overall safety and performance of the tram system.the overall safety and performance of the tram system.www.labortech.eu

Basic parameters:

Max. test compressive force – 300 kN,

Max. tightening/tightening torque – 12,000Nm

Use:

Railway industry – manufacturing of rolling stock and trams, rolling stock repair shops, transport companies, ŽOS, etc. This machine is a key tool for tram transport operators and tram maintenance and repair shops. maintenance and repair shops.

Materials tested:

Measurement and control of pressing/tightening force and tightening torque, including measurement of wheel runout and splits…

VIDEO

HALBAUTOMATISCHER ARBEITSPLATZ ZUR MONTAGE UND PRÜFUNG DER LABTEST MPT 1500-PA TRAKTIONSGERÄTE

DATA SHEET

Basic description:

The semi-automatic carousel workplace for assembly and testing of the LabTest MPT 1500 – PA traction device consists of four workplaces (positions). Each of these stations has a clearly defined function, namely: assembly station 1, assembly and adjustment station 2, test station and unloading station. The drawbar can be completely assembled and measured on the machine using the touch LCD monitor in conjunction with the MSVTest v. 1 test software. Part of the semi-automatic workplace is a manipulator (balancer), which ensures handling of drawbars and loads. The manual handling system can be replaced by a robotic system.

Basic parameters:

Max. test compressive force – 300kN

Max. test force- 1500 kN

Use:

Railway industry – manufacturing of rolling stock and trams, rolling stock repair shops, transport companies, ŽOS, etc. This machine is crucial for operators, manufacturers, maintenance and railway repair shops and engineering shops of railway wagons and locomotives.

Materials tested:

Measurement and control of traction devices including buffers for the railway industry

VIDEO

PRÜFSET ZUM TESTEN DER MECHANISCHEN EIGENSCHAFTEN VON KUPFER UND KUPFERLEGIERUNGEN – LABTEST MCS 20

DATA SHEET

Basic description:

The special LabTest MCS test assembly is intended for testing the mechanical properties of copper and copper alloys according to GOST 28515-97 and BS EN 12893:2000. The machine enables not only the testing of copper samples on 3 separate test areas, but also the preparation of test samples on a winding device working quickly and efficiently. The desired course of testing is set by the SIMATIC PLC control system. All evaluation and control of the test is carried out via the operating LCD display. All evaluation and control of the test is carried out via the operating LCD display. All evaluation and control of the test is carried out via the operating LCD display.

Basic parameters:

3 test workspaces, length of vertical axis – 1300 mm

Testing speed – 20 mm/s, spiral winding speed – 50 mm/min

Use:

EN 12893 – mechanical testing of copper samples and copper alloys, GOST 28515-97 – copper. Test method of spiral elongation of the specimen. EN 12893 – mechanical testing of copper samples and copper alloys, GOST 28515-97 – copper.

Materials tested:

Copper and copper alloys – Determination of helix elongation number Determination of helix elongation number

VIDEO

MEZERA

PRÜFSET FÜR BLATT- UND BANDPRÜFUNGEN MIT WECHSELBIEGE – LABTEST SMB 200

DATA SHEET

Basic description:

The special testing machine SMB 200 is intended for determining the ability of sheets and strips made of metal materials to be plastically deformed by alternating bending. Thanks to the electrically continuously adjustable arbitrary test angle, variable setting of the switching force in the range of 20 to 100 N, this test system can be configured with the help of definitions for a wide range of different types of samples. All evaluation and control of the test is carried out via the operating LCD display. Range of 20 to 100 N, this test system can be configured with the help of definitions for a wide range of different types of samples. D display.

Basic parameters:

Preload force: 20 – 100 N,

Nominal diameter or thickness of wire: 0.15 – 10 mm

Adjustable distance of rotation axis and driver (h): 5 – 100 mm

Angle of deviation of the lever from the starting position: 90°±3°

Use:

ISO 7799 – thickness test of sheets and strips by alternating bending. GOST 13813-68 – bending test for sheets and strips < 4 mm thick

Materials tested:

Steel sheets and their alloys

VIDEO

PRÜFMASCHINE ZUR BESTIMMUNG DER HÄRTBARKEIT NACH JOMINY – AQUATest 642

DATA SHEET

Basic description:

The LabTest – AQUATest 642 testing device is intended for testing the hardenability of test specimens in accordance with EN ISO 642. The AQUATest 642 test device consists of 3 test positions that allow the impact of a stream of water on the hardened front surface of the test specimens. The test machine consists of stainless steel tubs, where the water column is continuously regulated, a quick-closing tap and feedback regulation of the water. This entire system is controlled from a superior PLC with a touch LCD panel in IP 64 protection, which monitors individual flow sensors, water temperatures, level gauges and, last but not least, the heating of the medium.

Basic parameters:

3 test workspaces

Nominal diameter or thickness of wire: 0.15 – 10 mm

Adjustable distance of rotation axis and driver (h): 5 – 100 mm

Angle of deviation of the lever from the starting position: 90°±3°

Use:

Hardenability testing of test specimens in accordance with the EN ISO 642 standard

Materials tested:

Steel materials. Test specimens diameter 25 mm and length 100 mm.

VIDEO

Kontakt

LABORTECH s.r.o. , Rolnická 1534/130a, 747 05 Opava, Tschechische Republik

Unternehmen

Über uns Vertragshändler Karriere Firmenphilosophie Zertifizierung

Forschung und Entwicklung

Verringerung der Energieintensität Wir steigern Ihre Produktivität Kundenspezifische Entwicklung

News und Ereignisse

Nachricht Warum LABORTECH Newsletter Seminare und Messen

ISO-Zertifizierung Nationale Registrierung